sanding wood floors with nails
That being said … for those stubborn do-it-yourselfers and those with related or beginning skills, below are some tips and basic instructions for hardwood floor sanding, at your own risk. hardwood floor sanders, tools, and other equipment you will need. belt sander – generally, it’s a 220 volt hummel-brand sander and runs an 8″ x 29 1/4. Avoid sanding and filling. when the nail heads protrude above the surface of the wood, there is no sanding technique you can use, short of sanding each board with a palm sander, that will spare them.. To sand hardwood floors, start by renting a drum sander and installing a coarse grit sandpaper onto the sander, which will remove any noticeable damage or old finish from your floors. then, sand the entire area at the same angle, moving constantly as you work..
sanding wood floors with nails
If you do try to bleach, do not use household bleach—buy a product specifically designed for wood floors and do it 2-3 days before sanding so that the wood has time to dry. we limit the areas we fill to nail holes, dents, splintered board corners, and the short 'board-end' cracks. the cracks that run along the long edges of the board just. Every guide states that you should punch every nail of your floorboards into the wood so that it’s about 2mm under the surface. do i really have to punch down every nail before sanding? in our opinion – no. of course, you can’t have any nails protruding out of the surface, but we didn’t find it necessary to punch down the nails at all..
No comments:
Post a Comment