how to attach wood to concrete steps
Concrete steps may serve their purpose, but they are not the most attractive looking steps. you can spice up their appearance by adding some wood planks on top of them. the layer of wood you place over the top of the concrete steps can also make them stronger.. In order for a wooden stairway to be safe, the stringers (support boards) should be securely fastened to both the upper and lower floors. when the lower floor is made of concrete, you will need a special fastener to attach the wood to it unless one has already been embedded for this purpose.. After your holes are predrilled, you can attach the wood to the concrete by using the masonry screws. concrete anchor bolts. yet another way to attach wood to concrete is by using concrete anchor bolts. step 1 - predrill holes. predrill a hole into the wood and concrete that is large enough in diameter for the anchor bolt to fit. you want the.
how to attach wood to concrete steps
I would attach the posts directly to the sides of the steps, with the posts extending down as far as possible. this will get you more bearing surface between the posts and the steps, and allow for more anchors in the masonry spaced further apart.. The fastest and easiest way to attach most wood parts to concrete is to use a powder-actuated gun. to use it, load a special gun nail and a .22 caliber gun shell into the barrel. press the nose against the workpiece, pull the trigger and the shell will drive the fastener directly into the concrete. no predrilling or elaborate measuring and.
No comments:
Post a Comment