Woodworking Project

best way to sand a wood door

Before staining a wood door, take it off the hinges, remove all the hardware, and sand the door if it's been painted or stained previously. next, choose a good quality stain with a petroleum base. once everything is ready, put on protective eyewear and gloves and make sure you're working in a well ventilated area.. With the door resting on padded sawhorses, use a random-orbit sander with 80-grit paper to quickly remove what remains of the old varnish and sun-baked flakes of wood. sand the wood again with 100-grit paper, then 120-grit. "there's no sense in going any finer," dee says.. Using an oscillating sander to sand the old finish off an entry door. over time the sun, heat, cold, and rain can all take their toll on a wood entry door. even if the door is protected by a porch, the finish will still deteriorate over time. here’s how to go about sanding, staining, and finishing a weathered wood entry door..

How to neatly store and organize your scarves and belts

Sherwin williams freshwater - concepts and colorways

best way to sand a wood door
Sand as much of the door as possible with the sander, but avoid getting too close to decorative moulding or edging and possibly damaging the door. sand the door a second time using 100-grit sandpaper, then a third and final time with 120-grit sandpaper to achieve a flat, smooth finish.. A little basic knowledge of sanding and preparing wood before staining will help your staining project go faster and easier. the grade, or grit, of sandpaper is based on the number of sand granules per square inch of paper. the higher the number, the finer the grade. lower-numbered grades denote.

more info detail about best way to sand a wood door