how to remove wood stain with mineral spirits
Wipe the wood with a cloth saturated in mineral spirits to remove the remaining paint remover. for more stubborn spots, carefully use the 100-grit sandpaper and gently try to rub them out. clean the wood again with the mineral spirits and then sand the entire area with the 220-grit sandpaper.. After we sanded and stained our floors, the stain was applied on to thick and we needed to find a way to get the excess satin off. mineral spirits worked perfectly.. Switch back to the steel wool and rub it gently over the wood surface again. after using the steel wool, wipe the area with mineral spirits again to remove some of the stain and lighten the color. continue working until you’re satisfied with the wood’s color. give the wood a final wipe with a clean cloth to remove any excess mineral spirits..
how to remove wood stain with mineral spirits
Using mineral spirits can be a safe and effective way to remove the stains from your engineered hardwood floors without damaging the finish. however, if you have any doubts about the safety or efficacy of using mineral spirits on your engineered hardwoods, it is always best to consult an expert.. I was in the process of refinishing a 1920's oak quarter sawn table (don't worry i didn't strip the original finish, someone had stained it golden oak in the 90's and the finish was peeling) and.
No comments:
Post a Comment